A DC-DC converter in digital switch mode that enables power regulation of mechanical mods.
2.7V constant voltage battery cutoff function for output control from 5W to 15W
Supports atomizer resistances from 0.5Ω to 3.3Ω
Compatible batteries are 18350/18500/18650 with the Kick2 placed on the battery + terminal according to the size of the device.
Output Power : 5W to 15W
Output Voltage : 2.0V to 6.3V
Output Current : 6 Amps
Atomizer Resistance : 0.5ohm~3.3ohm
Low Battery Cutoff : 2.7 Volts loaded
*The two ground springs on the KIck2 main unit must be in contact with the inner wall of the metal battery tube. The gland springs will not function on battery tubes with an inner diameter greater than 19.5 mm or on special coating surfaces such as anodized aluminum.
Please be sure to use the Kick2 with the + terminal on the top of the battery and the - terminal on the bottom of the Kick2. If the terminals are reversed, the Kick2 will short-circuit and will not function.